eng Русский язык

Air Cooler Cleaner L.T.

AIR COOLER CLEANER L.T. is a powerful cleaning product familiar to AIR COOLER CLEANER, but it has a lower toxicity level. It dissolves accumulated deposits, oil, grease and soot, which are dissolved along with the product into the engine’s cylinders where burning of the deposits takes place.

Characteristics, Advantages & Applications

  • Ideal for the removal of oil, grease, soot and carbon deposits.
  • Highly efficient when used for air coolers and turbochargers.
  • Can safely be used, especially, when in operation without damaging the engine or running the risk of fire.
  • Maintains and keeps the air cooler clean so that the air input inside the cylinder is increased, this results in the maximization of horsepower and fuel combustion.
  • Cost effective, easy to handle and apply.

Physical Properties

A.C.C. L.T. is a liquid compound consisting of corrosion inhibitors, ionic metal surface activators and low toxicity aromatic hydrocarbons. Moreover, is important to note that it does not contain chlorinated solvents. A light milky solution is produced when diluted with water.

Appearance / Color Clear, colorless liquid
Odor Aromatic solvent
Specific gravity 0.82-0.85/15°C
Order No Size (in litres) Container
832502 25 Steel drum

Application and Use

A. Dosing Procedure

When the engine is in operation, the required quantity to be used is a 1:2 proportion diluted with water. When the engine is not in operation, A.C.C. L.T. will used undiluted and in quantities according to the judgment of the user and the degree of deposit accumulation, until such time, that cleaning is complete. In this case, A.C.C. may also be used.

B. Cleaning Procedure

When the engine is in operation, the A.C.C. L.T./Water solution must be injected directly into the top surface area of air cooler and sprayed over it by means of the auxiliary chemical solutions application tank. Then rinse with water and dry by blowing with compressed air. When the engine is not in operation and A.C.C. is absent, then A.C.C. L.T. may be used according to the A.C.C. instructions.

Safety and Handling

HANDLING Handle with care. Store in a dry, cool and well ventilated environment.
Eye Contact Avoid Eye contact. Otherwise, flush with plenty of water for a few minutes. Seek medical attention.
Skin Contact Avoid Skin contact. Otherwise, wash contaminated area thoroughly with water. Seek medical attention.
Inhalation Do not breathe gas/vapors. Otherwise, seek fresh air source at once. Seek medical attention. In case of insufficient ventilation, wear suitable respiratory equipment.
If Swallowed Avoid ingestion. Otherwise, consume a considerable quantity of water. Do not induce vomiting. Seek medical attention.
GENERAL INSTRUCTIONS Avoid spillage, splashing and mishandling. Precautionary measures for body protection are strongly recommended before use.

Read the Material Safety Data Sheet before using this product.

For detailed information on safety and health, please refer to Material Safety Data Sheet and/or Product Label.